Gold Color 3.0mm 1.75 Mm 3d Printer Filament Pla , 3d Printer
PLA 3D printer filaments information:
PLA (Polylactic Acid) 3d printer filament is 100% new pure
Polylactic Acid material. It is one of the most popular materials
for 3D printing. Our PLA filament has a relatively low melting
temperature, low warp properties and is biodegradable.
1.PLA filament has a lower melting point and prints easier than
other materials. One of the most important features is that PLA is
non-toxic, and even has a sweet smell when printing. PLA filament
has a low shrinkage rate and it is very rigid with minimal flex.
This material can print extremely high resolution models and is
perfect for a wide range of uses.
2. PLA filamentis considered stronger than ABS but is more
susceptible to cracking when flexing, impacted or subject to
torsional loads so the mechanical needs of the print project have
to be evaluated.
3. PLA filament has a huge range of vibrant colors and opacity for
that perfect look whether it is artistic or utilitarian, in short a
great material for 3D printing. PLA can be printed without the use
of a heat bead, and can stick to glass or a PCB plate with a binder
such as hairspray or white glue for a curl free print.
|Bed Temp||Optional or 40—60℃|
|Bed Setting||Masking tap or temperature resistant heat tape|
|Applicable Models||FDM—3D Printer|
Our advantage and service:
1,All of Our 3D Printer Filament are 100% virgin material, never
use recycled material or regrind material,.
2,Before the mass production, our engineer always do the test to
make sure that sure that each batch of new raw materials must be
printed by 3D printer.
3,The Laser diameter runs automatically to control the diameter of
the filament and keeps it in a right range of 1.75 / 3.0mm, and our
engineer will adjust it immediately when it alarms to indicate of
wrong size, and this unqualified filament will be cut off.
4,We to keep the filaments dry, each roll of filament is packed in
a vacuumed poly bag with a desiccant inside of it.